CTX 40/70 Series

The reinforced all-steel frame, solid pneumatic tires, large drum brakes, and optional weather enclosure ensures that the CLARK CTX 3-wheel Tow Tractor operates with the same ease of use, flexibility, and rugged durability that has been at the center of CLARK material handling truck manufacturing for over 100 years.

Find Dealer


Operator Compartment

The operator compartment had been designed with the operator in mind. The fully adjustable, full suspension seat is molded for support, which reduces operator fatigue and increases productivity. The tilt steering column is fully adjustable to suit the operator, and provides easier entry and exit. Additionally, the thick molded floor mat reduces vibration and noise level to improve operator comfort.


The stable platform has a low center of gravity, which is achieved by moving the steer axle back, dropping the battery compartment, and moving all major components lower. The wide stance of the CTX also provides excellent lateral stability.

Electric 48 Volt 100% AC System 

The fully enclosed 48 Volt AC System keeps out dust and other contaminants. Wet environments are not a problem for this electric powerhouse. With no brushes to change or commutator to turn, ever, routine brush changes are eliminated; there’s no need to pull the motor to turn and undercut the commutator; and it is much less likely to burn-out the motor during a stall. The two forms of regenerative braking include change of direction (proportional to accelerator position) and throttle release (proportional to accelerator position). The advanced thermal protection prevents heat damage to the motor and control.


The CTX has completely customizable parameters to the operators’ presence. These customizable options include acceleration rate, deceleration rate, and separate FW/RV max speed.  The CLARK CTX tow tractor is equipped with solid pneumatic tires, and can be equipped with an optional all-weather cabin, allowing operators to transition between indoor and outdoor spaces with ease. The CTX can also be equipped with a wide range of hitch types / styles to tailored to your needs.

Tech Specs

Load Capacity / Rated Load (lbs/kg) Height Overhead Guard (in/mm) Width (in/mm) Right Angle Stack (in/mm) Outside Turning Radius (in/mm) Inside Turning Radius (in/mm) Top Speed Loaded (kmp/mph) Top Speed Unloaded (kmp/mph) Power Unit - HP(KW) @rpm
CTX 40 8800 / 4000 39.2 / 995 80.1 (2035) N/A N/A / N/A 21.7 / 550 5.6 / 9 8.1 / 13 N/A
CTX 70 15400 / 7000 39.2 / 995 80.1 (2035) N/A N/A / N/A 21.7 / 550 4.3 / 7 10.6 / 17 N/A


Find a dealer near you